Difference between revisions of "Information Systems:Setting up an IBM i printer"
Jump to navigation
Jump to search
m |
|||
| Line 3: | Line 3: | ||
* Unbox, power on, and network the device. |
* Unbox, power on, and network the device. |
||
* Access the web GUI, fill out device information (name, location, SNMP). |
* Access the web GUI, fill out device information (name, location, SNMP). |
||
| − | * Set static IP and other network settings (DNS, gateway etc.). Use an IP within the range for printers (check DNS server or do a network scan). |
+ | * Set static IP and other network settings (DNS, gateway etc.). Use an IP within the range for printers (check DNS server or do a network scan). Use Colosoft to scan the network for acceptable IP range. Confirm selection of IP address with nslookup. Leave Netmask and gateway unchanged. |
| + | |||
* Give the device a hostname, using the convention (check DNS server for current printer names). |
* Give the device a hostname, using the convention (check DNS server for current printer names). |
||
Revision as of 11:55, 4 October 2019
Steps
Configure basic printer settings
- Unbox, power on, and network the device.
- Access the web GUI, fill out device information (name, location, SNMP).
- Set static IP and other network settings (DNS, gateway etc.). Use an IP within the range for printers (check DNS server or do a network scan). Use Colosoft to scan the network for acceptable IP range. Confirm selection of IP address with nslookup. Leave Netmask and gateway unchanged.
- Give the device a hostname, using the convention (check DNS server for current printer names).
- For printers that will be.