Information Systems:VoIP Phone Configuration

Desk Phone Setup

The first step when configuring a new phone desk phone is to unbox and label the phone to its extension.

The second step is to determine what port it will be plugged into , meaning which port on which switch it plugs into.

Tag The port switch port

Plug the phone into the local port

Log into 3cx

under the phones tab find the new phone by extension

hit assign extension

Use Lan at the office Use Interface 192.168.44.2

log into the phone interface and set the phone with a static IP? * maybe

DECT Phone Setup

web link to general setup https://www.3cx.com/sip-phones/manually-provision-yealink-dect/

• unbox the base and handset
• plug the base into switch
• navigate to the 3cx management page
• under the advanced tab select FXS/DECT
• add the base using the mac address to the list of bases already present.
• use the interface 192.168.44.2
• copy the provisioning link provided here in the general tab
• define the extensions in the extensions tab
• navigate to the ip address of the wireless base
• navigate to settings and auto configuration , use the provisioning link copied before in the space for server URL
• confirm , auto provision now.
• to add a phone to a base, press and hold the wifi button on the base until the top light starts to flash, then on the handset select register and they will find each other.