Difference between revisions of "Information Systems:Invoice Printers in DC"

From uniWIKI
Jump to navigation Jump to search
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Configuring Lexmark Printers in DC===
  
===Configuring Lexmark Printers in DC===
−
1. Set up the new Lexmark 521dn, assign the static IP address as mentioned in the wiki article, and network the device.
 +
1. Set up the new Lexmark 521dn, assign the static IP address as mentioned below, and network the device.
  +
 
2. Make sure that it is also set up in the DNS and assign a host name.
  
2. Make sure that it is also set up in the DNS and assign a host name.
  +
 
3. Go to the user interface and make the following changes:
  
3. Go to the user interface and make the following changes:
  +
 
a) Device settings – under About this Printer, add the Asset tag, Printer Location and Contact
  
a) Device settings – under About this Printer, add the Asset tag, Printer Location and Contact
  +
−
[[File:invPrint.png|300px]]
 +
[[File:invPrint.png|500px]]
   
 
b) Device Settings – under Notifications, go to “E-mail Alerts Setup”
 
b) Device Settings – under Notifications, go to “E-mail Alerts Setup”
  +
−
[[File:invPrint2.png|300px]]
 +
[[File:invPrint2.png|500px]]
   
 
c) Network/Ports – under AirPrint
  
c) Network/Ports – under AirPrint
  +
−
[[File:invPrint3.png|300px]]
 +
[[File:invPrint3.png|500px]]
   
 
d) Network/Ports – under TCP/IP
  
d) Network/Ports – under TCP/IP
⚫
[[File:invPrint4.png|300px]]
  
   
  ⚫
[[File:invPrint4.png|500px]]
⚫
4. Once the above steps are done, set up the printer on lucy1.unipharm.local. It is where the JetForm is installed. Make sure you follow the naming conventions as mentioned in the Wiki article “Invoice Printers in DC”
  
  +
  ⚫
4. Once the above steps are done, set up the printer on lucy1.unipharm.local. It is where the JetForm is installed. Make sure you follow the naming conventions as mentioned below.
  +
 
5. When adding the printer in the print management, make sure that that location and comment are added, along with the correct port.
  
5. When adding the printer in the print management, make sure that that location and comment are added, along with the correct port.
  +
 
6. The next step is to set up the printer on the IBM i network
  
6. The next step is to set up the printer on the IBM i network
−
Using the command WRKDEVD, copy the device description using 3 and change the Remote Location – Name/address as per the host name and the description as well.
 +
Using the command WRKDEVD, copy the device description using 3 and change the Remote Location – Name/address as per the host name and the description as well.
  +
−
[[File:invPrint5.png|300px]]
 +
[[File:invPrint5.png|500px]]
  +
 
7. Then, vary on the device in “Work with Device Descriptions” and start the writer using
 
7. Then, vary on the device in “Work with Device Descriptions” and start the writer using
   
Line 25: Line 36:
   
 
8. Once this is done, set up the printer as an ASW printer
  
8. Once this is done, set up the printer as an ASW printer
  +
 
a) Log in to ASW.
  
a) Log in to ASW.
  +
 
b) Go to System Management -> System setup -> Printer control tasks -> Work with Jetform printers.
  
b) Go to System Management -> System setup -> Printer control tasks -> Work with Jetform printers.
  +
 
c) F6 to add, enter the device name as configured everywhere
 
c) F6 to add, enter the device name as configured everywhere
⚫
For OTC, Printer: OTCINV02B
 
⚫
Text: Default output queue for printer OTCINV02B
  
   
  ⚫
For OTC, Printer: OTCINV02B
−
9. After that, set the device in JetForm
  
  ⚫
Text: Default output queue for printer OTCINV02B
⚫
remote into lucy1.unipharm.local and open JetForm under file -> management -> add a printer and then add the printer.
  
   
  ⚫
9. After that, set the device in JetForm -> remote into lucy1.unipharm.local and open JetForm under file -> management -> add a printer and then add the printer.
⚫
For OTC, Physical Device: OTCINV02B
  
  +
⚫
Print Agent Options: -afp..\..\ASW\480B\forms
  
  +
For instance, OTC,
⚫
Comments and Printer ID: *
  
  ⚫
Physical Device: OTCINV02B
  ⚫
Print Agent Options: -afp..\..\ASW\480B\forms
  ⚫
Comments and Printer ID: *
  +
Imp: After adding the printer, make sure to reload "Job Management DB"
   
 
10. After that, add the printer in the RF Control table.
  
10. After that, add the printer in the RF Control table.
  +
−
Start uniPHARM extensions -> VA Company -> Warehouse Menu (50) -> IT use only (80) -> Update Zone Printer Control (50)
  
−
And change the Queues with the updated ones.
 +
Start uniPHARM extensions -> VA Company -> Warehouse Menu (50) -> IT use only (80) -> Update Zone Printer Control (50) And change the Queues with the updated ones.
   
   
Line 47: Line 63:
 
|+ IP used for picking stations
  
|+ IP used for picking stations
 
|-
  
|-
−
! IP address !! Printer Name || Host Name|| Notes
 +
! IP address !! Printer Name || Host Name||Printer Model|| Notes
  +
|-
  +
|172.30.17.41 ||L90INV22B || dc-largedown-invoice-printer || MS521dn||
  +
|-
  +
|172.30.17.42 ||RXINV06B || dc-rx-invoice-printer || T652 ||IP not assigned to printer, but on DNS
 
|-
  
|-
−
|172.30.17.41 ||L90INV22B || dc-largedown-invoice-printer ||
+
|172.30.17.43 ||L90INV08B || dc-largedown2-invoice-printer || MS415dn || IP assigned, not is use, change in DNS, Near returns, it-lab-printer
 
|-
  
|-
−
|172.30.17.42 ||RXINV06B || dc-rx-invoice-printer || IP not assigned to printer, but on DNS
 +
|172.30.17.44 ||FRGINV21B || dc-fridge-invoice-printer || MS521dn||
 
|-
  
|-
−
|172.30.17.43 ||L90INV08B || dc-largedown2-invoice-printer || IP assigned, not is use, change in DNS, Near returns, it-lab-printer
 +
|172.30.17.45 ||NARINV21B || dc-narc-invoice-printer || MS521dn||
 
|-
  
|-
−
|172.30.17.44 ||FRGINV21B || dc-fridge-invoice-printer ||
 +
|172.30.17.47 ||SA1INV21B || dc-promo-invoice-printer || T652 ||
 
|-
  
|-
−
|172.30.17.45 ||NARINV21B || dc-narc-invoice-printer ||
 +
|172.30.17.48 ||U90INV27B || dc-largeup-invoice-printer ||MS521dn||
 
|-
  
|-
−
|172.30.17.47 ||SA1INV21B || dc-promo-invoice-printer ||
 +
|172.30.17.57 ||FRUINV12B || dc-candy-invoice-printer || MS521dn|| updated
 
|-
  
|-
−
|172.30.17.48 ||U90INV27B || dc-largeup-invoice-printer ||
 +
|172.30.17.58 ||HBAINV03B || dc-haba-invoice-printer || MS521dn || updated
 
|-
  
|-
−
|172.30.17.57 ||FRUINV12B || dc-candy-invoice-printer ||
+
|172.30.17.59 ||OTCINV02B || dc-otc-invoice-printer ||MS521dn|| updated
 
|-
  
|-
−
|172.30.17.58 ||HBAINV03B || dc-haba-invoice-printer || Change IP on printer, Need to be configured
 +
|172.30.17.61 ||HHCINV05B || dc-hhc-invoice-printer ||MS531dw || updated
 
|-
  
|-
−
|172.30.17.59 ||OTCINV02B || dc-otc-invoice-printer ||
 +
|172.30.17.65 ||TESTINV || dc-test-invoice-printer || MS531dw||
 
|-
  
|-
−
|172.30.17.61 ||HHCINV05B || dc-hhc-invoice-printer ||Need to be configured
 +
|172.30.17.66 ||DCTESTINV || dc-dctest-invoice-printer || MS531dw||
 
|-
  
|-
 
|}
  
|}

Latest revision as of 15:02, 18 June 2024

Configuring Lexmark Printers in DC

1. Set up the new Lexmark 521dn, assign the static IP address as mentioned below, and network the device.

2. Make sure that it is also set up in the DNS and assign a host name.

3. Go to the user interface and make the following changes:

a) Device settings – under About this Printer, add the Asset tag, Printer Location and Contact

invPrint.png

b) Device Settings – under Notifications, go to “E-mail Alerts Setup”

invPrint2.png

c) Network/Ports – under AirPrint

invPrint3.png

d) Network/Ports – under TCP/IP

invPrint4.png

4. Once the above steps are done, set up the printer on lucy1.unipharm.local. It is where the JetForm is installed. Make sure you follow the naming conventions as mentioned below.

5. When adding the printer in the print management, make sure that that location and comment are added, along with the correct port.

6. The next step is to set up the printer on the IBM i network 

     Using the command WRKDEVD, copy the device description using 3 and change the Remote Location – Name/address as per the host name and the description as well.

invPrint5.png

7. Then, vary on the device in “Work with Device Descriptions” and start the writer using 

     STRPRTWTR printername

8. Once this is done, set up the printer as an ASW printer

a) Log in to ASW.

b) Go to System Management -> System setup -> Printer control tasks -> Work with Jetform printers.

c) F6 to add, enter the device name as configured everywhere 

      For OTC, Printer: OTCINV02B 
      Text: Default output queue for printer OTCINV02B

9. After that, set the device in JetForm -> remote into lucy1.unipharm.local and open JetForm under file -> management -> add a printer and then add the printer. 

       For instance, OTC, 
       Physical Device: OTCINV02B
       Print Agent Options: -afp..\..\ASW\480B\forms
       Comments and Printer ID: *

Imp: After adding the printer, make sure to reload "Job Management DB"

10. After that, add the printer in the RF Control table.

Start uniPHARM extensions -> VA Company -> Warehouse Menu (50) -> IT use only (80) -> Update Zone Printer Control (50) And change the Queues with the updated ones.


IP used for invoice printers in DC:

IP used for picking stations
IP address Printer Name Host Name Printer Model Notes
172.30.17.41 L90INV22B dc-largedown-invoice-printer MS521dn
172.30.17.42 RXINV06B dc-rx-invoice-printer T652 IP not assigned to printer, but on DNS
172.30.17.43 L90INV08B dc-largedown2-invoice-printer MS415dn IP assigned, not is use, change in DNS, Near returns, it-lab-printer
172.30.17.44 FRGINV21B dc-fridge-invoice-printer MS521dn
172.30.17.45 NARINV21B dc-narc-invoice-printer MS521dn
172.30.17.47 SA1INV21B dc-promo-invoice-printer T652
172.30.17.48 U90INV27B dc-largeup-invoice-printer MS521dn
172.30.17.57 FRUINV12B dc-candy-invoice-printer MS521dn updated
172.30.17.58 HBAINV03B dc-haba-invoice-printer MS521dn updated
172.30.17.59 OTCINV02B dc-otc-invoice-printer MS521dn updated
172.30.17.61 HHCINV05B dc-hhc-invoice-printer MS531dw updated
172.30.17.65 TESTINV dc-test-invoice-printer MS531dw
172.30.17.66 DCTESTINV dc-dctest-invoice-printer MS531dw
Retrieved from "https://owl.unipharm.com/mediawiki/index.php?title=Information_Systems:Invoice_Printers_in_DC&oldid=14681"