Information Systems:Invoice Printers in DC

From uniWIKI
Revision as of 15:11, 2 November 2023 by Gurneetk (talk | contribs)
Jump to navigation Jump to search

Configuring Lexmark Printers in DC

1. Set up the new Lexmark 521dn, assign the static IP address as mentioned in the wiki article, and network the device.

2. Make sure that it is also set up in the DNS and assign a host name.

3. Go to the user interface and make the following changes:

a) Device settings – under About this Printer, add the Asset tag, Printer Location and Contact

invPrint.png

b) Device Settings – under Notifications, go to “E-mail Alerts Setup”

invPrint2.png

c) Network/Ports – under AirPrint

invPrint3.png

d) Network/Ports – under TCP/IP

invPrint4.png

4. Once the above steps are done, set up the printer on lucy1.unipharm.local. It is where the JetForm is installed. Make sure you follow the naming conventions as mentioned below.

5. When adding the printer in the print management, make sure that that location and comment are added, along with the correct port.

6. The next step is to set up the printer on the IBM i network

     Using the command WRKDEVD, copy the device description using 3 and change the Remote Location – Name/address as per the host name and the description as well.

invPrint5.png

7. Then, vary on the device in “Work with Device Descriptions” and start the writer using

     STRPRTWTR printername

8. Once this is done, set up the printer as an ASW printer

a) Log in to ASW.

b) Go to System Management -> System setup -> Printer control tasks -> Work with Jetform printers.

c) F6 to add, enter the device name as configured everywhere

      For OTC, Printer: OTCINV02B 
      Text: Default output queue for printer OTCINV02B

9. After that, set the device in JetForm -> remote into lucy1.unipharm.local and open JetForm under file -> management -> add a printer and then add the printer.

       For OTC, Physical Device: OTCINV02B
       Print Agent Options: -afp..\..\ASW\480B\forms
       Comments and Printer ID: *

10. After that, add the printer in the RF Control table.

Start uniPHARM extensions -> VA Company -> Warehouse Menu (50) -> IT use only (80) -> Update Zone Printer Control (50) And change the Queues with the updated ones.


IP used for invoice printers in DC:

IP used for picking stations
IP address Printer Name Host Name Notes
172.30.17.41 L90INV22B dc-largedown-invoice-printer Configured
172.30.17.42 RXINV06B dc-rx-invoice-printer IP not assigned to printer, but on DNS
172.30.17.43 L90INV08B dc-largedown2-invoice-printer IP assigned, not is use, change in DNS, Near returns, it-lab-printer
172.30.17.44 FRGINV21B dc-fridge-invoice-printer Configured
172.30.17.45 NARINV21B dc-narc-invoice-printer Configured
172.30.17.47 SA1INV21B dc-promo-invoice-printer Configured
172.30.17.48 U90INV27B dc-largeup-invoice-printer
172.30.17.57 FRUINV12B dc-candy-invoice-printer
172.30.17.58 HBAINV03B dc-haba-invoice-printer Configured
172.30.17.59 OTCINV02B dc-otc-invoice-printer Configured
172.30.17.61 HHCINV05B dc-hhc-invoice-printer Need to be configured