Information Systems:Configuring ZT231 in uniPHARM Production

From uniWIKI
Revision as of 09:57, 16 October 2023 by Gurneetk (talk | contribs)
Jump to navigation Jump to search

1. Assigning IP to ZT231

(a) Download and install the driver from Zebra’s Website – support page.

(b) Connect the printer to an Ethernet cable that is connected to the switch.

(c) Plug the power cord into an appropriate power outlet and turn on (I) the printer.

(d) Once it’s on, go to Connection and select “Wired”.

(e) Assign the IP, subnet (255.255.248.0), and Gateway (172.30.16.1)

(f) Also, complete the Wizards and calibrate the printer. 

       Ps. Remember that in Print Wizard, select “Direct Thermal” as print type, “Gap/Notch” as media type, and “Tear Off” as media handling.

(g) For ZT231 “PRICE TICKET LABELS” ONLY, go to the web interface using their IP and change their TEAR OFF ADJUST to +002.

GUI ZT231.png

2. Adding ZT231 to the Print Management

(a) Navigate to the Windows Control Panel and select Devices and Printers.

(b) Click Add a printer.

(c) Click The printer that I want isn’t listed.

(d) Select the Add a local printer or network printer with manual settings option and click Next.

(e) Select the Create a new port option and select Standard TCP/IP from the drop-down menu.

(f) Enter the printer IP address in both the empty fields, click OK, and click Next.

(g) From the left panel, select ZDesigner and select ZT231 203 dpi EPL on the right. Click Next.

(h) You will need to change the printer's name as per the picking station and click Next.

(i) From Printer Sharing, select “Do not share this printer”.

(j) Open the Zebra Printer Setup Utility for Windows to convert it to ZPL to EPL mode

  • Left-click to select your printer and click the “Open Communication With Printer button”.
  • Type the below command
           ! U1 setvar "device.languages" "zpl"
           ! U1 setvar "device.pnp_option" "zpl"
           ! U1 do "device.reset" "" <CR>
  • Click Send to Printer: The printer will restart and the printer language is changed.

3. Adding ZT231 to Green Screen (ERP)

(a) Login to the Green Screen.

(b) In the green screen press F4 to get to a Command Line and Type the command: CALL QCMD and press ENTER.

(c) For full-screen command line press F11.

(d) After that, type the command 

     CRTOUTQ OUTQ(QUSRSYS/FRUPTK12B) RMTSYS(*INTNETADR) RMTPRTQ('raw2') AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(*WSCST) WSCST(QSYS/QWPDEFAULT) INTNETADR('172.30.17.95') DESTOPT(XAIX) SEPPAGE(*NO)

(e) The above OUTQ has to be edited and in order to edit the writer has to end, follow below 

     ENDWTR nameOfOutq

(f) Make the below changes:

CHGOUTQ1.png

CHGOUTQ2.png

CHGOUTQ3.png


(g) After that, start the writer, follow below: 

   STRRMTWTR OUTQ(nameOfOutq)

For Price Ticket Labels, check

LBLMENU

Option 1 – Label Design Locate the format: PRICETK7 Option 22 – Print Options

LBLMENU.png


IP used for picking stations:

IP used for picking stations
172.30.17.77 MAILING LABEL 172.30.17.78 LARGE DOWN (1) SHIPPING 172.30.17.79 LARGE DOWN (1) PRICE TICKET 172.30.17.80 LARGE UP SHIPPING 172.30.17.81 LARGE UP PRICE TICKET 172.30.17.82 LARGE DOWN (2) SHIPPING 172.30.17.83 LARGE DOWN (2) PRICE TICKET 172.30.17.84 PROMO SHIPPING 172.30.17.85 PROMO PRICE TICKET 172.30.17.86 PHARMACY RX SHIPPING 172.30.17.87 PHARMACY RX PRICE TICKET 172.30.17.88 HEALTHCARE SHIPPING

172.30.17.89 HEALTHCARE PRICE TICKET 172.30.17.90 OTC SHIPPING 172.30.17.91 OTC PRICE TICKET 172.30.17.92 HABA SHIPPING 172.30.17.93 HABA PRICE TICKET 172.30.17.94 NARCOTIC SHIPPING 172.30.17.95 FRUBOX12B CANDY SHIPPING 172.30.17.96 NARCOTIC PRICE TICKET 172.30.17.97 FRUPTK12B CANDY PRICE TICKET 172.30.17.98 FRIDGE SHIPPING 172.30.17.99 FRIDGE PRICE TICKET

Retrieved from "https://owl.unipharm.com/mediawiki/index.php?title=Information_Systems:Configuring_ZT231_in_uniPHARM_Production&oldid=14510"